CNC vertical machining center running an NC program with G54 work offset and G43 tool length compensation active on the controller display for G-code and M-code CNC machining
Insights, Process Explainers

G-Code and M-Code for CNC Machining: Work Offsets, Tool Compensation, Post-Processors, and Program Verification

G-code and M-code sit on top of a much larger chain that decides whether a CNC part meets your drawing. The finished part depends on the coordinate chain, the post-processor, the modal state, and a verification chain from CAM simulation through first article inspection. This guide covers where ISO 6983-1:2009 draws its boundaries, how work offsets and tool compensation behave on FANUC, Haas, Siemens, and Heidenhain controllers, why post-processor mismatches produce collision-free simulations but rejected parts, and what a procurement or engineering owner should audit before releasing an NC program.